| |
|
Click HERE for a complete Worksurface Mat Selection Chart to help you determine the worksurface that best suits your needs.
Need a Sample – Request it Here
|
| |
|
- Economical Dual Layer Vinyl Material
Versatile dissipative worksurface table mat provides reliable path to ground and allows for use with continuous monitors.
- Dissipative Light Emboss Top Layer
Non-glare finish makes it easier to identify small parts
- Non-Humidity Dependence
Provides consistent electrical performance regardless of ambient humidity
- Dissipative Worksurface - 10E6 - 10E8 Ohms RTT
- Lead-Free RoHS Compliant
- Made In America
Rp-p (front side): 10E6 - 10E8 Ohms per ANSI/ESD S4.1
Rp-p (back, black side): <10E6 Ohms per ANSI/ESD S4.1
Thickness: 0.060" (1.5mm)
Per ESD Association: "The most important functional consideration for worksurfaces is the RTG resistance from the top of the surface to the groundable point." ANSI/ESD S20.20 Table 1 recommends a requirement of less than 1 x 10E9 ohms. "If Charged Device Model damage is a concern then setting a lower resistance limit should be considered. Typically, 1 x 10E6 ohms." "Durability factors that should be considered are hardness, abrasion resistance, tear resistance, etc. Worksurfaces may require special heat resistant materials. Light reflection may be an important ergonomic consideration." (Ref: TR 20.20 section 5.3.1).
|
|