• Small size - 70mm x 53mm.
  Takes up minimal worksurface area.
• Two 10mm studs installed on bottom of unit.
  Permanently snap monitor flush on mat.
• Two 10mm push and clinch sockets included.
  Easy installation on mat - no added wires.
• Stand-by 4mm and 10mm parking snap.
  Keeps unit from going into alarm when user disconnects cord.
• Real-time monitoring of ESD workstation including wrist strap, mat, and cords.
  Pays for itself - ensures ESD protected workstation, reducing catastrophic and latent defects.
• Utilizes reliable wave distortion technology.
  Provides true 100% continuous monitoring. Cannot be fooled; no false alarms. Not pulsed current which is off over 90% of the time.
• Can be used with any brand of single-wire wrist strap and cord.
  With less expensive, more durable single-wire components, life-cycle costs of monitor/wirst strap/cord are up to 66% lower than dual-wire approach.
• Miniscule electrical current required to generate waveform.
  No reported case of skin irritation.
• Designed for use by 1.5m tall 40.8kg person to 1.83m 113.8kg person.
  Individual adjustment for each operator is almost never necessary.
• Provided with calibration to European standards.
  Simple means to assure accurate performance. Lower calibration life cycle costs.
• Convertor included.
  Converts a 4mm banana jack to a 10mm stud
• Made in America
  Superior Quality

Please note: The power adaptor must be ordered separately.