|
- Hard, rigid laminate
- Designed for new or replacement ESD workbench tops
- High pressure laminate resistant to hot solder and most solventsl
- Low Tribocharging
- Exceeds NEMA standards for wear resistance
- Static control properties will continue for the lifetime of the material
Conductive layer for superior charge dissipation and zero voltage suppression
- Mat top kits provide instant ESD laminate surface to non-ESD tables
- RTT: 106 - 108 ohms per ANSI/ESD S4.1-1997
- RTG: 106 - 108 ohms per ANSI/ESD S4.1-1997
- Charge Decay: <0.0009 seconds per FTMS-101C, Method 4046
- Voltage Suppression: 0 volts per ETS Method
- Thickness: 0.038" (0.97mm)
- Mat kits include
one #13165 common point ground, one 10mm factory installed snap, and pressure sensitive tape on the reverse side.
- Lead-free RoHS compliant
- Made in America
Per ESD Handbook TR20.20 worksurface 5.3.1.9.3 High Pressure Laminates:
These materials are rigid and are applied to a substrate, typically with adhesive systems. The majority of these materials follow the multi-layer description above. There are, however, some types that are basically homogeneous in construction.
Because the electrical properties of many high pressure laminates have some degree of humidity dependence, all high pressure laminate materials should be carefully tested for adequate performance at low humidity prior to selection and installation. Multi-layer Micastat® with conductive layer is not homogenous and is not humidity dependent.
"It should be understood that any object, item, material or person could be a source of static electricity in the work environment. Removal of unnecessary nonconductors, replacing nonconductive materials with dissipative or conductive materials and grounding all conductors are the principle methods of controlling static electricity in the workplace, regardless of the activity." [ESD Handbook TR 20.20 section 2.4]
Due to variations in computer monitor displays, color shown may not be exact. For true accurate color, please email Service@ESDSystems.com to request an actual sample.
Closeout items are subject to a 90-day warranty for materials and workmanship. No credit will be issued. Vermason to approve exchange for similar items.
|
|