| |
|
Need a Demo – Request it Here
|
| |
|
- Analogue Compliance Verification Surface Resistance Checker
Used for determining if a surface is dissipative, conductive or insulative
- Automatic Test Range Voltage Selection Per Compliance Verification ESD TR53
Starts tests at 10 volts and automatically switches to 100 volts if the measurement is over 10E5 ohms
- Portable Operation with 9 Volt Battery
No charging or sourcing of special batteries needed
- LED Illuminates When Battery Power is Low
Prevents operator from making bad measurements
- NIST Calibrated with Certificate
Calibrated with accepted procedures and standards traceable to the National Institute of Standards Technology
- Made in America
“In order to be effective the ESD coordinator needs … access to measuring equipment for the purposes of performing compliance verification audits as well as testing new ESD products and materials for use in the ESD program … management must provide the ESD coordinator with the authority and funding necessary to ensure that the ESD control program is maintained and enforced.” [TR 61340-5-2:2008 User guide clause 4.1.1 Assignment of an ESD coordinator]
|
|