The Specialists in ESD Protection
000 Checkout

Added to your cart

You do not have any items in your shopping cart at this time.
View All cart items
Full Catalog > Wrist Strap and Footwear Testers > Footwear and Wrist Strap Testers >
Wrist strap testing:
If you are not using a continuous or a constant monitor, a wrist strap should be tested while being worn at least daily. This quick check can determine that no break in the path-to-ground has occurred. Wrist straps should be worn while they are tested. This provides the best way to test all three components: the wrist band, the ground cord (including the resistor) and the interface with the operator's skin. If the wrist strap tester outputs a FAIL test result, stop working, and test the wrist band and cord individually to find out which item is damaged. Replace the bad component, and repeat the test. Obtain a PASS test result before beginning work. 

Footwear testing:
If using a flooring / footwear system as an alternative for standing or mobile workers, ESD footwear should be tested independently at least daily while being worn. Proper testing of foot grounders involves the verification of the individual foot grounder, the contact strip and the interface between the contact strip and the operator's perspiration layer. If the footwear tester outputs a FAIL test result, stop working, and test the foot grounder and contact strip individually to find out which item is damaged. Replace the foot grounder. Obtain a PASS test result before beginning work.
 
The EMIT SmartLog Pro™ verifies the functionality of an operator's wrist strap and footwear, logs their test results and controls access to an ESD Protected Area.
The Vermason Combo Tester X3 verifies the functionality of an operator’s wrist strap and footwear. It determines if an operator’s wrist strap and footwear will function correctly. The operator’s wrist strap and footwear (both feet) will test simultaneously with no need for separate tests. 
The Vermason Combo Tester verifies the functionality of an operator’s wrist strap and footwear (footwear test requires foot plate). It determines if an operator’s wrist strap and footwear will function correctly. A rocker switch allows the operator to select a wrist strap or footwear test.
The Vermason High Speed, High Accuracy Footwear & Wrist Strap Tester comprises a digital test unit controlled by a programmable IC. It measures the resistance in the circuit including the body of the operator. The instrument will indicate whether the resistance is in the ranges specified in EN 61340-5-1 using Annex A test method A.1.
The Vermason High Speed, High Accuracy Footwear & Wrist Strap Tester with Output features a relay terminal that can be integrated with electronic door locks, lights, buzzers, etc. It is capable of switching up to .5A @ 50VDC.
The Vermason Compact Wrist Strap & Footwear Tester can be used to test personnel wrist straps and footwear. The tester uses LEDs and an audible alarm to indicate whether the measured resistance is within the range specified by EN 61340-5-1.


Not sure which tester is best for your application? Check-out our Tester Selection Chart.

Need a Demo – Request it Here



Total Number of Items in Category: 37

1