The Specialists in ESD Protection
000 Checkout

Added to your cart

You do not have any items in your shopping cart at this time.
View All cart items
Full Catalog > Wrist Strap and Footwear Testers > Footwear and Wrist Strap Testers > Combo Tester X3 >
Wrist strap testing:
If you are not using a continuous or a constant monitor, a wrist strap should be tested while being worn at least daily. This quick check can determine that no break in the path-to-ground has occurred. Wrist straps should be worn while they are tested. This provides the best way to test all three components: the wrist band, the ground cord (including the resistor) and the interface with the operator's skin. If the wrist strap tester outputs a FAIL test result, stop working, and test the wrist band and cord individually to find out which item is damaged. Replace the bad component, and repeat the test. Obtain a PASS test result before beginning work. 

Footwear testing:
If using a flooring / footwear system as an alternative for standing or mobile workers, ESD footwear should be tested independently at least daily while being worn. Proper testing of foot grounders involves the verification of the individual foot grounder, the contact strip and the interface between the contact strip and the operator's perspiration layer. If the footwear tester outputs a FAIL test result, stop working, and test the foot grounder and contact strip individually to find out which item is damaged. Replace the foot grounder. Obtain a PASS test result before beginning work.
 
The Vermason Combo Tester X3 verifies the functionality of an operator’s wrist strap and footwear. It determines if an operator’s wrist strap and footwear will function correctly. The operator’s wrist strap and footwear (both feet) will test simultaneously with no need for separate tests. Green lights indicate that the wrist strap and footwear are passing. Red lights and an audible alarm indicate when the wrist strap and/or footwear (left or right) are failing. If failure occurs, the tester will also display if the grounding device’s resistance is too low or too high.


Not sure which tester is best for your application? Check-out our Tester Selection Chart.

Need a Demo – Request it Here



Total Number of Items in Category: 9

1