NEW PRODUCT
Overhead Zero Volt Ioniser
  • Best Overhead Ionizer Now Available from Vermason
  • Low Balance (Offset Voltage)
    Balance ±3 volt, typically; ±5 volts maximum
    Auto-Balancing Sense Feedback
  • Fast Discharge Time
    Tested at 3.1 seconds Neutralization Discharge
    Time under fan 1,000 volts to 100 volts per
    EN 61340-5-1 Test method A.6 for ionization
    tested per Figure A.22 for overhead ionisers
  • Made in America, 1 Year Limited Warranty
 
Item
Description
UOM
Regular Price
Internet Price*
200300

Overhead Zero Volt Ioniser, 2 Fan, 220V (Power Cord Sold Separately)

Ea
£856.38
£815.60
200305
Overhead Zero Volt Ioniser, 3 Fan, 220V (Power Cord Sold Separately)
Ea
£1,039.50
£990.00
200155
Emit Point Tip Cleaner
20/Pack
£25.75
£24.52
200165
Replacement Emitter Points for System ZVI
100/Pack
£268.42
£255.64
200325
Remote Control, Infared, Battery Operated
Ea
£202.47
£192.83
200220
Power Cord for Continental Europe (Schuko), 2 Pin
Ea
£2.87
£2.73
200225
Power Cord for UK, Ireland, and Asia, 3 Pin
Ea
£5.17
£4.92

*Only available when buying online
“Ionisers should be considered as a method for charge netralization in cases where grounding cannot be acheived. These may include localized (bench) ionized air blowers, compressed air Ionisers, spot Ionisers, tape dispenser Ionisers, and total room Ionisers.” “Air ionization can neutralize the static charge on insulated and isolated objects by seperate charges in the molecules of the gases in the surrounding air. When a static charge is present on objects in the work environment , it will be neutralized by attracting opposite polarity charges from the Ionised air. Note that ionization systems should not be used as a primary means of charge control on conductors or people.
As with all Ionisers, periodic maintenance will be needed to provide optimum performance.” (EN 61340-5-2 paragraph 5.2.9)
“Various feedback and auto balance techniques are available to ensure ionizer performance. Providing a sensor for each ionizing device can improve feedback control. Effective control can reduce the amount of necessary maintenance. (EN 61340-5-2 paragraph 5.2.9.2 Monitoring and feedback control)
 
Click here for a list of Distributors
and Sales Reps
All products and
programs are available
through your
participating distributor
Click here to arrange a demonstration
If you would rather not receive these emails, click here
If you are having trouble with the unsubscribe feature, e-mail Ian.Isation@StaticExperts.com
The Specialists in ESD Protection
Ask an ESD question
Vermason.co.uk