• The only conductive ONE COAT 2-part epoxy on the market
• Epoxy is a tight cross-linking thermosetting epoxide polymer
providing superior toughness and durability
• Water based, safe for use and shipment
• 15 liter kit with pre-measured part A and B, just add together
and mix
• Thin mil system allows for easy repair for damaged areas
• ESD floor meets EN 61340-5-1 Edition 1.0 2007-08 tested per IEC 61340-4-1 Rp-p 10E4 - 10E6 ohms is suitable for ESD flooring component in Person/footwear / flooring system as personnel grounding method <3,5 x 10E7 ohms per
IEC 61340-4-5
Resistance in Combination with a Person
• Made In America
210226 - STATGUARD® EPOXY, PRIMER, 15L KIT
• Epoxy primer designed for use under 210225 Statguard®
Conductive Epoxy or where a high build primer is needed
• Enhances adhesion
• For use over prepared concrete or wood surfaces
• Ideal for use on porous concrete or over a rough surface profile
• Made in America
“Permanent materials are broadly defined as floor coverings, including rubber or vinyl tile and sheet goods, epoxy coatings, high-pressure laminates, and carpet. As a group, these materials have an extended use life and provide protection over a broad physical area. [CLC/TR 61340-5-2:2008 User guide section 4.7.3.6.1 Permanent floor materials]
“Paints and epoxy coatings are applied to concrete floors in thin coats. The primary advantages of these materials are their ease of application and coverage over a wide area. They have a longer usable life than do floor finishes …” [CLC/TR 61340-5-2:2008 User guide section 4.7.3.6.2.4 Paints and coatings]
If you would rather not receive these emails: please Click Here
If you are having trouble with the unsubscribe feature, e-mail Ian.Isation@StaticExperts.com
|