 |
 |
Statfree Z2™
Dissipative 3 Layer Vinyl |
Statfree O™
Dissipative 3 Layer Vinyl
|
|
|
 |
|
|
|
• Heat fused vinyl composite
• Conductive grid mesh inner layer
Provides consistent, reliable, and defined grounding
path, compatible with continuous monitors.
• As worksurface or shelf mat
Protects parts susceptible to physical shock
• Thickness: 3.2mm
• Rp-p: 10E6 - 10E8 ohms & Rg: 10E6 - 10E8 ohms
tested per IEC 61340-2-3
Meets working surface limit and recommendation of
EN 61340-5-1
• Abrasion resistant top layer
Smooth surface is easy to clean and maintain
• Compatible with Continuous Monitors
• Non-humidity dependence
Provides consistent electrical performance regardless
of ambient humidity
• Dimensionally stable
Minimal shrinkage and curling
• Lead-free RoHS compliant
• Grounding Hardware not included
• Made in America
|
|
• Thick, energy absorbing
Excellent cushioning mat for trays, carts and benches.
• Dissipative cushioned vinyl bottom layer
Provides energy absorption for components
susceptible to physical shock like disk drives
• Soft, pliable, material
Can be easily die cut or razor cut
• Thickness: 9.5mm
• Rp-p: 10E6 - 10E8 ohms & Rg: 10E6 - 10E8 ohms
tested per IEC 61340-2-3
Meets working surface limit and recommendation of
EN 61340-5-1
• Compatible with Continuous Monitors
• Non-humidity dependence
Provides consistent electrical performance regardless
of ambient humidity
• Dimensionally stable
Minimal shrinkage and curling
• Lead-free RoHS compliant
• Grounding Hardware not included
• Made in America
|
|
|
|
|
|
|
|
| Item |
Description |
Price |
| 210990 |
Statfree Z2, Grey Roll, |
£737.22 |
| |
3.2mm x 1.2m x 15.2m |
|
| 210991 |
Statfree Z2, Blue Roll, |
£737.22 |
| |
3.2mm x 1.2m x 15.2m |
|
|
|
| Item |
Description |
Price |
| 211000 |
Statfree O, Blue Roll, |
£621.61 |
| |
9.5mm x 0.6m x 18.3m |
|
| 211001 |
Statfree O, Blue Roll, |
£932.40 |
| |
9.5mm x 0.9m x 18.3m |
|
|
|
|
Per EN 61340-5-1 Edition 1.0 2007-08 “Table 3 EPA requirements the limit for Working surfaces, storage racks and trolleys is <1x10E9 ohms tested per IEC 61340-2-3” and per NOTE 6 “In situations where charged device model (CDM) damage is a concern a lower point to point resistance limit of 1x10E4 ohms is recommended.”
“The most important functional consideration for work surfaces is the resistance from the top of the surface to the groundable point [Rgp]. This establishes the resistance of the primary path to ground for items placed on the surface. IEC 61340-5-1 has set a resistance to ground range for work surfaces of less than 1,0 x 10E9 ohms.
However, it is sometimes necessary to use work surfaces that are much more conductive. This is allowed under IEC 61340-5-1 but the reasons for using a more conductive work surface shall be documented in the ESD control program plan.” [CLC/TR 61340-5-2:2008 User guide clause 4.7.1.2.5 Electrical considerations – Work Surfaces]
|
|
|
 |
|
|
|
|
|
|
|
If you would rather not receive these emails: please Click Here |
 |
If you are having trouble with the unsubscribe feature, e-mail Ian.Isation@StaticExperts.com |
|
|
|
|
|
| Vermason.co.uk |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|