All components of ESD tape dispenser can be
grounded with ground cord (or through work
surface*) to be used in ESD Protected Area.
• Stainless Steel Construction
Minimizes foreign objects debris, corrosion, and
other contamination when used in clean or
sensitive areas. Simplifies cleaning.
• Two Separate Spools Turn Independently
Holds one 50mm wide roll of tape or two rolls
of tape that are 25mm or less widths
depending on needs.
• Heavy Weighted Design
Extra weight allows for one-handed use;
dispenser will not slide on most surfaces.
• Grounding Jack
For operator personnel grounding with wrist
strap or other grounding requirements
• Made In America
|
*Best practice is grounding via supplied ground cord. Attach cord to snap on chassis and to common point ground. If grounded
via placing on a grounded ESD worksurface, resistance to ground (RTG) should be periodically tested <1 x 10E9 ohms.
Click HERE for compatible ESD worksurfaces.
“Tools intended for use within the EPA [ESD protected area] shall, as far as is practicable, be so constructed that they do not generate or hold an electrostatic charge ….
All tools and machinery, for example electrical, mechanical or pneumatic, shall be so constructed that any non‑insulating part of the tool or machine which may touch an ESDS [ESD sensitive items] shall be at EPA ground potential.”
[EN 61340-5-1 clause 5.2.10 Tools, machinery, dispensers and test equipment]
If you would rather not receive these emails: please Click Here
If you are having trouble with the unsubscribe feature, e-mail Ian.Isation@StaticExperts.com
|