|
 |
|
|
|
|
|
Bench Top Zero Volt Ioniser |
|
Mini Zero Volt Ioniser |
|
|
|
|
|
|
|
|
• Ultra compact size - 13.3cm H x 8.9cm W x
4.3cm D
• Low offset voltage with feedback alarms
• Two fan speeds, high and low
• Powered by 24 volts DC, AC adapter must be
ordered separately
Click HERE for the Euro 2-pin power supply
Click HERE for the UK/Asia 3-pin power supply
• Rapid Access Maintenance
• Utilizes steady state DC ionization with Desco
Emit's patented (US Patent# 4,974,115) Sense
Feedback Control
• Visual and audible power and alarm indicators
• 5 Year limited warranty
• Made in America
• Low Ozone Emissions – tests well below the OSHA limit of 0.05 ppm ozone
|
|
|
|
|
• The best balancing ioniser available
• Voltage offset controlled to ±3 Volts typical
• Features steady state DC ionization and Desco
EMIT's patented (US Patent #4,974,115) Sense
Feedback balancing
• Rapid Access Maintenance
• Provides automatic balancing of the ionisation
system
• Sealed "Thru-Tunnel" air flow design
• Communication via RS485 compatible data
output with a host computer
• CSA approved
• 5 Year limited warranty
• Made in America
• Low Ozone Emissions – tests well below the OSHA limit of 0.05 ppm ozone
|
|
|
|
|
|
|
|
| Item |
Description |
UOM |
Price |
| 50640 |
Mini Zero Volt Ioniser, SS, 220VAC, No Adaptor |
Ea |
£293.68 |
| 50670 |
Bench Top Zero Volt Ioniser, SS, 220VAC, No Adaptor |
Ea |
£389.12 |
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
“Ionisers should be considered as a method for charge neutralization in cases where grounding cannot be achieved. These may include localized (bench) ionised air blowers, compressed air ionisers, spot ionisers, tape dispenser ionisers and total room ionisers.” “Air ionisation can neutralize the static charge on insulated and isolated objects by producing separate charges in the molecules of the gases of the surrounding air. When a static charge is present on objects in the work environment, it will be neutralized by attracting opposite polarity charges from the ionised air. Note that ionisation systems should not be used as a primary means of charge control on conductors or people. As with all ionisers, periodic maintenance will be needed to provide optimum performance.” (EN 61340-5-2 paragraph 5.2.9)
“Various feedback and auto balance techniques are available to ensure ioniser performance. … Providing a sensor for each ionising device can improve feedback control. Effective control can reduce the amount of necessary maintenance. (EN 61340-5-2 paragraph 5.2.9.2 Monitoring and feedback control)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
If you would rather not receive these emails: please Click Here |
|
|
If you are having trouble with the unsubscribe feature, e-mail Ian.Isation@StaticExperts.com |
|
|
|
|
|
|
|
|
| Vermason.co.uk |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|