|
 |
|
|
 |
|
|
|
• Durable rubber material, dissipative on one side
and conductive on the other
• Dissipative Side Rp-p: 10E6 - 10E8 Ohms
Slows charge removal; meets the minimum recommended
worksurface requirement of IEC 61340-5-1
• Conductive Side Rp-p: 10E3 - 10E4 Ohms
Compatible for use with continuous monitors
• Thickness: 1.8mm
• Lightly embossed surface
Easier to clean than vinyl mats; excellent coefficient friction
for handling electronic products
• Premium Nitrile Butadiene Homogenous Rubber
with no clay or silica fillers
Superior durability and electricals provides value, long life
without discoloring and delamination
• Superior heat, chemical and wear resistance
Excellent choice in soldering and other challenging
manufacturing environments.
• Top of mat kits laser engraved with ESD protective
symbol & manufacturer
Identifies ESD protective product for control & auditing
purposes
• Non-humidity dependence
Provides consistent electrical performance regardless of
ambient humidity
• Dimensionally stable and lays flat
Minimal shrinkage and curling
• Superior limited lifetime warranty
Electricals guaranteed for the life of the mat
• Lead-free RoHS compliant
• To see mats in use, click here
• Made in America |
|
Per EN 61340-5-1 Edition 1.0 2007-08 “Table 3 EPA requirements the limit for Working surfaces, storage racks and trolleys is <1x10E9 ohms tested per IEC 61340-2-3” and per NOTE 6 “In situations where charged device model (CDM) damage is a concern a lower point to point resistance limit of 1x10E4 ohms is recommended.”
“The most important functional consideration for work surfaces is the resistance from the top of the surface to the groundable point [Rgp]. This establishes the resistance of the primary path to ground for items placed on the surface. IEC 61340-5-1 has set a resistance to ground range for work surfaces of less than 1,0 x 10E9 ohms.
However, it is sometimes necessary to use work surfaces that are much more conductive. This is allowed under IEC 61340-5-1 but the reasons for using a more conductive work surface shall be documented in the ESD control program plan.” [CLC/TR 61340-5-2:2008 User guide clause 4.7.1.2.5 Electrical considerations – Work Surfaces] |
|
|
|
|
| Item |
Description |
| 210980 |
Statfree Euro T2, Blue Roll, |
| |
1.8mm x 0.6m x 12.2m |
| 210981 |
Statfree Euro T2, Blue Roll, |
| |
1.8mm x 0.76m x 12.2m |
| 210982 |
Statfree Euro T2, Blue Roll, |
| |
1.8mm x 1.2m x 12.2m |
| 210983 |
Statfree Euro T2, Grey Roll, |
| |
1.8mm x 0.6m x 12.2m |
| 210984 |
Statfree Euro T2, Grey Roll, |
| |
1.8mm x 0.76m x 12.2m |
| 210985 |
Statfree Euro T2, Grey Roll, |
| |
1.8mm x 1.2m x 12.2m |
|
|
|
|
|
|
|
|
|
Note code PromoV290 on your online order.
Promotional price is valid for online orders only.
This offer may not be used in combination with any other Vermason promotional offer.
|
|
|
 |
|
|
|
|
|
|
If you would rather not receive these emails: please Click Here |
 |
If you are having trouble with the unsubscribe feature, e-mail Ian.Isation@StaticExperts.com |
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
