| |
Statguard® Conductive Epoxy is a waterborne, two-part epoxy floor coating formulated to control the dissipation of static electricity and provide path to ground. Statguard® Conductive Epoxy is very effective as a static control floor coating for electronics manufacturing, assembly, and storage. It is available in light gray RAL 7038, in 4 gallon (15.14 liter) kits. The color may vary between production lots.
Per Handbook ESD TR20.20 ESD Floor section 5.3.4.7.3 “Epoxy and Polymeric Overlayments...have good chemical, solder, and abrasion resistance and will withstand heavy vehicle traffic. They are easier to maintain in comparison to other materials. They are seamless and can be used in many clean room environments. However, they cannot be used on access floor panels. Because epoxies are virtually manufactured onsite, proper installation techniques are critical to the successful performance of this type of material.”
Statguard® Conductive Epoxy exceeds ANSI/ESD S20.20 minimum recommended technical requirements of <1 x 10E9 ohms for ESD protected flooring and suitable for flooring component in Flooring - Footwear System as primary grounding method (<3.5 x 10E7 ohms per ESD STM 97.1).
View a color swatch sample here
Need a Sample – Request it Here
|
| |