The purpose of an ESD protective working surface is to aid in the prevention of damage to ESD sensitive items (ESDS) and assemblies from electrostatic discharge. ESD mats need to be grounded. A ground wire from the mat should connect to the common point ground which is connected to ground, preferably equipment ground. For electronics manufacturing a worksurface resistance to ground (Rg) of 1 x 104 to less than 1 x 109 ohms is recommended. Best practice is that ground connections use firm fitting connecting devices such as metallic crimps, snaps and banana plugs to connect to designated ground points. The use of alligator clips is not recommended. Find accessories here.
To ensure the continuing safety of people and ESD-sensitive electronics, all static-controlled workstations should be periodically tested for ground integrity. See our resistance tester section
for more details.
For optimum electrical performance, surfaces must be cleaned regularly using an ESD mat cleaner. Vermason suggests using our Reztore™ Surface & Mat Cleaner
. Do not use cleaners with silicone. Silicone buildup will create an insulative film on the surface.
Vermason's Statfree O™ matting
meets the flooring, storage rack and working surface limit and recommendation of EN 61340-5-1. This material is a dissipative 3-Layer vinyl that can be used as either a bench or floor mat. It is a thick, energy-absorbing mat which provides economical antifatigue properties when used as a floor mat. As a bench mat, it can protect parts susceptible to physical shock. The smooth surface allows for easy clean-up. Mat is compatible with continuous monitors
Need a Sample – Request it Here